该小组履行以下部分或全部职责：

建筑技工和工业机械师

• 阅读蓝图、图表和示意图以确定工作程序
• 根据布局图使用手动和电动工具安装、对齐、拆卸和移动固定式工业机械和机械设备，例如泵、风扇、水箱、输送机、熔炉和发电机
• 在机械的安装、设置和维修过程中操作起重机、千斤顶和拖拉机等起重和起重设备以定位机械和零件
• 检查和检查机器和设备，以检测和调查异常情况和故障
• 安装、故障排除和维护动力传输、真空、液压和气动系统以及可编程逻辑控制
• 调整机器并修理或更换有缺陷的零件
• 操作车床和磨床等机床，制造大修、维护或安装机械所需的零件
• 清洁、润滑和执行机械的其他日常维护工作
• 为机器建造地基或指导其他工人建造地基
• 在安装之前使用手动和电动工具以及焊接设备组装机械和设备。

纺织机械技工和修理工

• 应用机械维修原则和程序以确保机械正常运行
• 检测机械中的缺陷和过度磨损，识别零部件尺寸和形状的细微差异
• 修理和检修纺织机械上的电气和机械系统，并根据需要更换和校准运动部件
• 为新的模式和产品设置和调整复杂的机器
• 分析信息以执行维护，例如纺织机械的清洁和润滑、故障排除，以及测试机器的运行和正常操作
• 与管理层协商以推荐设备变更和修改以及评估新设备。

• 通常需要完成中学和培训课程或职业课程。
• 通常需要完成三到四年的学徒计划或五年以上的工作经验和工业机械维修或制造行业课程的组合才有资格获得行业认证。
• 从其他行业聘用的纺织机械技工可能需要额外的纺织工艺培训和纺织制造机械操作员的经验。
• 所有省份和地区都提供工业技工（技工）行业认证，但属于自愿性质。
• 魁北克和安大略省提供建筑技工行业认证，但属于自愿性质。
• 魁北克提供工业缝纫机技工行业认证，但属于自愿性质。
• 成功完成省际红印章考试后，合格的工业机械师或技工也可以获得红印章背书。

• 建筑工人主要从事工业厂房机械设备的初始安装；工业机械师更关心机械设备的安装后维护和修理。
• 工业机械师和技工可能会在第二个行业接受交叉培训，例如管道安装、焊接、机加工或电气维护。
• 随着经验的积累，可能晋升到主管职位。
• 红印章背书允许跨省流动。

• 重型设备机械师（72401）
• 工业仪器技术员和机械师（22312）
• 技工工头/女工；工业机械主管（72020 承包商和主管，机械行业）

This group performs some or all of the following duties:

Construction millwrights and industrial mechanics

• Read blueprints, diagrams and schematic drawings to determine work procedures
• Install, align, dismantle and move stationary industrial machinery and mechanical equipment, such as pumps, fans, tanks, conveyors, furnaces and generators according to layout plans using hand and power tools
• Operate hoisting and lifting devices such as cranes, jacks and tractors to position machinery and parts during the installation, set-up and repair of machinery
• Inspect and examine machinery and equipment to detect and investigate irregularities and malfunctions
• Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls
• Adjust machinery and repair or replace defective parts
• Operate machine tools such as lathes and grinders to fabricate parts required during overhaul, maintenance or set-up of machinery
• Clean, lubricate and perform other routine maintenance work on machinery
• Construct foundations for machinery or direct other workers to construct foundations
• Assemble machinery and equipment prior to installation using hand and power tools and welding equipment.

Textile machinery mechanics and repairers

• Apply mechanical repair principles and procedures to make sure that machinery runs properly
• Detect defects and excessive wear in machinery and identify slight differences in dimensions and shapes of component parts
• Repair and overhaul electrical and mechanical systems on textile machinery and replace and align moving parts as required
• Set-up and adjust complex machinery for new patterns and products
• Analyze information to perform maintenance such as cleaning and lubrication of textile machinery, troubleshooting, and to test running and proper operation of machines
• Confer with management to recommend equipment changes and modifications and in evaluating new equipment.

• Completion of secondary school and training courses or a vocational program is usually required.
• Completion of a three- to four-year apprenticeship program or a combination of over five years of work experience and industry courses in industrial machinery repair or millwrighting is usually required to be eligible for trade certification.
• Textile machinery mechanics hired from other industries may require additional training in textile processes and experience as a textile manufacturing machinery operator.
• Industrial mechanic (millwright) trade certification is available, but voluntary, in all provinces and territories.
• Construction millwright trade certification is available, but voluntary, in Quebec and Ontario.
• Industrial sewing machine mechanic trade certification is available, but voluntary, in Quebec.
• Red Seal endorsement is also available to qualified industrial mechanics or millwrights upon successful completion of the interprovincial Red Seal examination.

• Construction millwrights are mostly engaged in the initial installation of industrial plant machinery and equipment; industrial mechanics are more concerned with the post-installation maintenance and repair of machinery and equipment.
• Industrial mechanics and millwrights may be cross-trained in a second trade such as pipefitting, welding, machining or electrical maintenance.
• Progression to supervisory positions is possible with experience.
• The Red Seal endorsement allows for interprovincial mobility.

• Heavy-duty equipment mechanics (72401)
• Industrial instrument technicians and mechanics (22312)
• Millwright foreman/woman; industrial mechanics supervisor (in 72020 Contractors and supervisors, mechanic trades)