该小组履行以下部分或全部职责：

车身碰撞、修补和玻璃技术人员

• 审查损坏报告和维修成本估算，并计划要执行的工作
• 维修和更换前端部件、车身部件、车门和车架以及车身底部部件
• 使用木块和锤子敲出凹痕、带扣和其他缺陷
• 操作焊接设备或使用塑料填料填充孔洞、凹痕和接缝
• 使用扳手和割炬拆下损坏的挡泥板、面板和格栅，然后用螺栓或焊接更换零件到位
• 使用框架和底部牵引和锚固设备拉直弯曲的框架
• 使用手动和电动工具锉削、打磨和打磨修复车身表面
• 为喷漆做准备的遮罩和胶带汽车车身表面
• 混合油漆，混合和匹配颜色
• 使用刷子或喷枪涂抹底漆并重新粉刷表面
• 修理和更换挡风玻璃、窗户和天窗等玻璃部件
• 修理或更换内饰部件，例如座椅框架组件、地毯和地板隔热层
• 检查修理过的车辆并试驾车辆是否正确处理。

汽车损坏维修估算器

• 检查车辆并估算维修和修复车辆的成本和时间
• 撰写有关损坏和成本估算的报告
• 与技术人员一起计划和协调工作流程
• 遵守汽车行业安全规范和标准
• 提供客户服务，例如回答所有客户查询并解释完整的维修过程
• 与保险公司跟进索赔相关信件
• 订购零件和材料
• 维护准确的文档并获得客户签名
• 监督最终维修的外观和工作质量。

• 汽车车身修理师认证在安大略省和艾伯塔省是强制性的，在育空地区和西北地区是自愿的。
• 成功完成跨省红印章考试后，合格的汽车修补技术人员也可以获得红印章背书。
• 通常需要完成中学学业。
• 通常需要汽车玻璃行业认证。

• 金属修理工、机动车制造

• 通常需要完成中学学业。
• 提供一到两年的在职培训。
• 通常需要完成中学学业。
• 通常需要完成中学学业。
• 通常需要完成三到四年的汽车车身和碰撞损坏技术员学徒计划，或者结合三年以上的汽车车身和碰撞技术员行业工作经验，并完成专业或大学汽车车身维修计划有资格获得贸易认证。
• 汽车修补技师行业认证通常需要完成两到三年的汽车油漆工学徒计划，或者结合一年的汽车修补技术人员行业工作经验并完成高中或大学汽车油漆计划。
• 汽车车身和碰撞技师的行业认证在新斯科舍省、安大略省和艾伯塔省是强制性的，但在纽芬兰和拉布拉多、爱德华王子岛、新不伦瑞克省、马尼托巴省、萨斯喀彻温省、不列颠哥伦比亚省、育空地区、西北地区和努纳武特地区是自愿的.
• 成功完成省际红印章考试后，合格的汽车车身和碰撞技术人员也可以获得红印章背书。
• 汽车修补技术人员认证在艾伯塔省是强制性的，但在纽芬兰和拉布拉多、新斯科舍、爱德华王子岛、新不伦瑞克、安大略、曼尼托巴、萨斯喀彻温、不列颠哥伦比亚、育空和西北地区是自愿的。
• 新斯科舍省、安大略省和不列颠哥伦比亚省提供汽车玻璃技术人员的学徒培训和行业认证，但都是自愿的。

• 汽车车身和碰撞技术人员

• 汽车修补技术人员

• 汽车玻璃技术员

• 汽车损坏维修估算器

• 通常需要完成中学学业。
• 通常需要结合两到三年的相关汽车经验和教育。

• 受雇于机动车制造的金属修理工可以通过学徒计划晋升到机动车修理工职位，或者，随着经验的积累，他们可以晋升到机动车制造的监督职位。
• 红印章背书允许跨省流动。
• 凭借经验，汽车车身、碰撞和修补技术人员和汽车损坏维修估算员可能会晋升到主管职位。

• 汽车服务技术人员、卡车和公共汽车机械师和机械修理工（72410）
• 汽车油漆工 - 制造业（在94213 工业油漆工、涂层工和金属精加工操作员中）
• 主管，机动车装配（92020）
• 机动车车身修理工工头/女工（72020 承包商和主管，机械行业）

This group performs some or all of the following duties:

Auto body collision, refinishing and glass technicians

• Review damage report and estimates of repair cost and plan work to be performed
• Repair and replace front end components, body components, doors and frame and underbody components
• Hammer out dents, buckles and other defects using blocks and hammers
• Operate soldering equipment or use plastic filler to fill holes, dents and seams
• Remove damaged fenders, panels and grills using wrenches and cutting torch and bolt or weld replacement parts into place
• Straighten bent frames using frame and underbody pulling and anchoring equipment
• File, grind and sand repaired body surfaces using hand and power tools
• Mask and tape auto body surfaces in preparation for painting
• Mix paint, blend and match colours
• Apply primers and repaint surfaces using brush or spray guns
• Repair and replace glass components such as windshields, windows and sunroofs
• Repair or replace interior components, such as seat frame assembly, carpets and floorboard insulation
• Inspect repaired vehicles and test drive vehicles for proper handling.

Automobile damage repair estimator

• Inspect vehicle and estimate the costs and times for the repair and restoration of the vehicle
• Write report on damage and cost estimate
• Plan and coordinate work processes with the technicians
• Follow automobile industry safety norms and standards
• Provide customer service, such as answering all customer inquiries and explaining the complete repair process
• Follow up with insurance companies for claim related correspondence
• Order parts and material
• Maintain accurate documentation and obtain customer signatures
• Oversee final repairs for appearance and quality of work.

• Auto body repairer certification is compulsory in Ontario and Alberta and available, but voluntary, in the Yukon and the Northwest Territories.
• Red Seal endorsement is also available to qualified automotive refinishing technicians upon successful completion of the interprovincial Red Seal examination.
• Completion of secondary school is usually required.
• Auto glass industry certification is usually required.

• Metal repairers, motor vehicle manufacturing

• Completion of secondary school is usually required.
• One to two years of on-the-job training are provided.
• Completion of secondary school is usually required.
• Completion of secondary school is usually required.
• Completion of a three- to four-year auto body and collision damage technician apprenticeship program or a combination of over three years of work experience in the auto body and collision technician trade and completion of a professional or college automotive body repair program is usually required to be eligible for trade certification.
• Completion of a two- to three-year automotive painter apprenticeship program or a combination of one year of work experience in the automotive refinishing technicians trade and completion of a high school or college automotive painting program is usually required for automotive refinishing technicians trade certification.
• Trade certification for auto body and collision technician is compulsory in Nova Scotia, Ontario and Alberta and available, but voluntary, in Newfoundland and Labrador, Prince Edward Island, New Brunswick, Manitoba, Saskatchewan, British Columbia, the Yukon, the Northwest Territories and Nunavut.
• Red Seal endorsement is also available to qualified auto body and collision technician upon successful completion of the interprovincial Red Seal examination.
• Automotive refinishing technicians certification is compulsory in Alberta and available, but voluntary, in Newfoundland and Labrador, Nova Scotia, Prince Edward Island, New Brunswick, Ontario, Manitoba, Saskatchewan, British Columbia, the Yukon and the Northwest Territories.
• Apprenticeship training and trade certification for automotive glass technicians is available, but voluntary, in Nova Scotia, Ontario and British Columbia.

• Auto body and collision technicians

• Automotive refinishing technicians

• Automotive glass technicians

• Automobile damage repair estimator

• Completion of secondary school is usually required.
• A combination of two- to three-year of relevant automotive experience and education is usually required.

• Metal repairers employed in motor vehicle manufacturing may progress to motor vehicle repairer positions through an apprenticeship program, or, with experience, they may progress to supervisory positions in motor vehicle manufacturing.
• The Red Seal endorsement allows for interprovincial mobility.
• With experience, auto body, collision and refinishing technicians tradespersons and automobile damage repair estimators may progress to supervisory positions.

• Automotive service technicians, truck and bus mechanics and mechanical repairers (72410)
• Car painter - manufacturing (in 94213 Industrial painters, coaters and metal finishing process operators)
• Supervisors, motor vehicle assembling (92020)
• Motor vehicle body repairers foreman/woman (in 72020 Contractors and supervisors, mechanic trades)