该小组履行以下部分或全部职责：

• 操作和监控造纸厂、造纸和整理工艺机械和设备，如筛选设备、漂白设备、消化器、混合罐和洗涤机，以执行一个或多个纤维素加工步骤和设备，如干燥机、层压机、切割机、涂布机、压光机和起重机执行一个或多个造纸和整理过程步骤
• 观察设备和机械面板指示器、仪表、液位指示器和其他设备仪表，以检测机械和设备故障并确保按照规范执行工艺步骤
• 与制浆、造纸和涂料控制操作人员沟通，根据需要进行工艺调整和启停机械设备
• 收集加工样品并对纸浆和溶液进行滴定测试、pH 读数、比重测试和其他常规测试
• 目视检查纸张是否有皱纹、孔洞、变色、条纹或其他缺陷，并采取纠正措施
• 完成并维护生产报告。

• 必须完成中学学业。
• 可能需要林产品加工或相关学科的大学文凭。
• 需要完成数周的正式公司培训和/或在职培训。
• 通常需要有在同一家公司工作过的经验。
• 可能需要工业急救证书。
• 可能需要天然气方面的能力证书。

• 随着经验的积累，可能会晋升为制浆或造纸和涂料控制操作员职业。
• 这个职业组内的工作之间的流动性有限。

• 木材、纸浆和纸张加工工人（95103）
• 纸张加工机操作员（94122）
• 制浆、造纸和涂料控制操作员（93102）
• 主管，林产品加工（92014）

This group performs some or all of the following duties:

• Operate and monitor paper mill, papermaking and finishing process machinery and equipment such as screening equipment, bleaching equipment, digesters, mixing tanks and washers to carry out one or more cellulose processing steps and equipment such as dryers, laminators, cutters, coaters, calenders and hoists to carry out one or more papermaking and finishing process steps
• Observe equipment and machinery panel indicators, gauges, level indicators and other equipment instruments to detect machinery and equipment malfunctions and ensure process steps are carried out according to specifications
• Communicate with pulping, papermaking and coating control operator to make process adjustments and start up or shut down machinery and equipment as required
• Collect processing samples and conduct titration tests, pH readings, specific density tests and other routine tests on pulp and solutions
• Inspect paper visually for wrinkles, holes, discolouration, streaks or other defects and take corrective action
• Complete and maintain production reports.

• Completion of secondary school is required.
• A college diploma in forest products processing or a related subject may be required.
• Completion of several weeks of formal company training and/or on-the-job training is required.
• Previous experience as a labourer within the same company is usually required.
• A certificate in industrial first aid may be required.
• A competency certificate in natural gas may be required.

• Progression to pulping or papermaking and coating control operator occupations is possible with experience.
• There is limited mobility among jobs within this occupational group.

• Labourers in wood, pulp and paper processing (95103)
• Paper converting machine operators (94122)
• Pulping, papermaking and coating control operators (93102)
• Supervisors, forest products processing (92014)