该小组履行以下部分或全部职责：

装配工

• 根据蓝图组装和安装金属和其他预制部件以达到精密公差，以构建重型电动机或变压器
• 组装重型电动机的定子或电枢；压缩钢叠片以构建变压器铁芯；使用桥式起重机将绕组组装到铁芯中，并使用压接、钎焊和焊接设备进行电气连接
• 组装和安装电动机或变压器辅助设备，例如套管、分接开关、接线盒、加热设备、保护设备和冷却设备
• 设置和调整生产机械和设备，例如线圈绕线机，用于制造重型电气设备
• 可以对电动机进行基本测试。

电气装配工和接线工

• 解读工程图纸、电气原理图和蓝图
• 将电机启动器、接触器、电容器、断路器、电压调节器、印刷电路板或其他电气控制设备安装到配电盘和配电盘中，以生产自动化过程控制设备、配电盘或其他工业电气控制设备
• 配电盘和配电盘的电气连接线
• 组装面板和配电柜并安装用于承载大电流的母线
• 可以操作金属制造设备来制造或修改母线。

检查员

• 监控生产并解决生产问题
• 检查电动机、变压器或控制设备的最终组装是否符合质量控制标准
• 收集、记录和汇总检查结果。

• 通常需要完成中学学业。
• 可能需要大学电气或电子技术课程。
• 通常会提供数年的在职培训。
• 本单元组的安装人员、检查员和主管可能需要在同一家公司担任装配工、装配工或接线工的经验。

• 随着经验的积累，可能晋升到主管职位。

• 装配工和检验员，电器、仪器和设备制造（94202）
• 电气机械 ( 72422)
• 电气和电子工程技师和技术员（22310）
• 主管，电子和电气产品制造（92021）

This group performs some or all of the following duties:

Assemblers

• Assemble and fit metal and other prefabricated parts to close tolerances according to blueprints to build heavy-duty electric motors or transformers
• Assemble stators or armatures for heavy-duty electric motors; compress steel laminations to build transformer cores; assemble windings into core using overhead cranes and make electrical connections using crimping, brazing and soldering equipment
• Assemble and fit electrical motor or transformer auxiliary equipment such as bushings, tap changes, conduit boxes, heating devices, protective equipment and cooling equipment
• Set up and adjust production machinery and equipment, such as coil winding machines, for the manufacture of heavy-duty electrical equipment
• May perform basic tests on electric motors.

Electrical fitters and wirers

• Interpret engineering drawings, electrical schematics and blueprints
• Fit motor starters, contactors, capacitors, circuit breakers, voltage regulators, printed circuit boards or other electrical control devices into switchboards and panelboards to produce automated processing control equipment, electrical distribution panels, or other industrial electrical control equipment
• Wire electrical connections for switchboards and panelboards
• Assemble panelboard and switchboard cabinets and install bus bars used to carry heavy electrical current
• May operate metal fabricating equipment to fabricate or modify bus bars.

Inspectors

• Monitor production and troubleshoot production problems
• Check final assembly of electric motors, transformers or control equipment for adherence to quality control standards
• Collect, record and summarize inspection results.

• Completion of secondary school is usually required.
• College courses in electricity or electro-technology may be required.
• Several years of on-the-job training are usually provided.
• Set-up persons, inspectors and leadhands in this unit group may require experience as an assembler, fitter or wirer in the same company.

• Progression to supervisory positions is possible with experience.

• Assemblers and inspectors, electrical appliance, apparatus and equipment manufacturing (94202)
• Electrical mechanics (72422)
• Electrical and electronics engineering technologists and technicians (22310)
• Supervisors, electronics and electrical products manufacturing (92021)